Welcome to FlowState Manufacturing –
Where Precision Meets Innovation!
At FlowState, we're not just about creating products; we're about crafting solutions. As a cutting-edge manufacturing company, we seamlessly blend precision engineering with innovative design to bring you unparalleled solutions.
78-85 Monte Carlo Malibu El Camino Radio delete bezel.
These are 3D printed with USA Made glass filled ABS. They hold up well in high temps and look amazing.
Drop in rear cupholders for s550 Ford Mustangs. These saddle the hump in the rear floorboard, and secured with included Velcro strips.
Wide, 4in cup with a step down in the bottom for smaller drinks.
Choose between GT, GT/CS, and Pony logos as well as optional color options.
If you need a custom logo or color feel free to send me a message, I usually can accomodate any requests.
Three gauge pod for s550 Mustangs. 3D printed with carbon fiber filled ASA plastic (UV resistant ABS)
Installation:
carefully pry up and pop off the orginal ac vent trim, then gently pry up and pop off the center dash plate. You will need to unclip and remove the zip tie from the center speaker wiring harness so that the clip will not interfere with the new gauge pod. Reassemble dash components in reverse order after installing gauges.
This is my new cupholder design for 1982-1984 Firebirds. All you need to do is remove the metal insert inside your ashtray, and snap in my cupholder. It is easily removed and can be stored away when not needed. Cupholder sized to fit a 30 tumbler (80mm opening).
3D printed with USA made carbon fiber filled ABS from Atomic Filament . It will endure high temps, and remain rigid while holding a full drink.
3D printed with high quality USA made PETG filament, UV and chemical resistant.
Clamps onto the front wheel upright bearing.
Fits 2.25in front wheel uprights of the latest MZ Magnum, Rambler, Revolt,
3D printed with high quality USA made PETG filament, UV and chemical resistant.
Clamps onto the front wheel upright bearing.
Fits 2.5in front wheel uprights of the latest ZT Elite
3D printed with high quality USA made PETG filament, UV and chemical resistant.
Clamps onto the front wheel upright bearing.
Fits 2.25in front wheel uprights of the latest MZ Magnum, Rambler, Revolt,
3D printed with USA made, ABS filament from Atomic Filament. These rigid, and made from ABS, same as most of the other plastic on the car. It will handle any interior car heat without issue.
These are high quality and fit perfect.
This will let you install a double din head unit in your 3rd gen Camaro.
Includes adjustable side brackets for mounting your radio.
3rd Gen Camaro Double Din Radio Bezel with heat/AC controls below the radio.
Printed with an OEM like texture in Black. (other colors are possible, message me for requests)
Reversed HVAC controls. The vent heat air condition controls are positioned on the bottom. You will need to make new screw holes to mount the HVAC panel in the lower position. I've circled the holes with red in one of the pics.
This raises the double din unit up for better viewing. Also give you a pretty exclusive modification to your car.
Fits 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, and 92 Camaro models.
This is my new cupholder design for 1985-1992 Firebirds. All you need to do is remove the metal insert inside your ashtray, and snap in my cupholder. It is easily removed and can be stored away when not needed. Cupholder sized to fit a 30 tumbler (80mm opening).
3D printed with USA made carbon fiber filled ABS . It will endure high temps, and remain rigid while holding a full drink.
78-88 Cutlass Double Din Radio Bezel. With frosted frame backlit and logo
Features Cutlass Rocket on left side. Radio opening 180mm x 100mm ( 7in x 4in) fits most 7in double din screens great. You will need to reuse your spring clips from your original bezel. I can make them for a singe din, HVAC deleted, as well as other customizations for led backlight, different colors, etc. Message me for a quote. 3D printed with high quality black petg plastic.
These tools are a gauge to set consistent bevel angles when honing chisels and plane blades. It features a stop block to make the handling easier.
Full Size version. ~4in x 2in
Large easy to read text
Choose Chisel, Plane, or Both
High quality print for accuracy. These are printed with high accuracy and checked for quality control.
1982-1992 Camaro Ash Tray Plate voltmeter USB charger with cubby
Includes fused connection wires.
This is a plate that will replace your ashtray in 1982 - 1992 Chevrolet Camaro.
Multicolor designs (These are NOT led Backlit)
3D Printed in high quality PETG plastic.
78-85 Monte Carlo Malibu El Camino HVAC delete bezel.
HVAC Panel opening deleted. Nice clean look. Double and Single din versions.
These are 3D printed with USA Made Atomic PETG filament. They hold up well in high temps and look amazing.
This will let you install a double din head unit in your 3rd gen Camaro.
Includes adjustable side brackets for mounting your radio.
3rd Gen Camaro Double Din Radio Bezel with Radio in upper position, and air hvac panel deleted.
features led backlit Z28 logo (3rd gen camaro version of the logo). Choose Which color LED for the backlite, RED, BLUE, or GREEN. These are single color leds. (NOT RGB led;s)
Printed with an OEM like texture in Black.
This will let you install a double din head unit in your 3rd gen Camaro.
Includes adjustable side brackets for mounting your radio.
3rd Gen Camaro Double Din Radio Bezel with Radio in upper position, and air hvac panel deleted.
Printed with an OEM like texture in Black. (other colors are possible, message us for requests)
This raises the double din unit up for better viewing.
Lie Nielsen honing gauge. Printed in white PLA+ plastic.
With angles: 20, 25, 30, 35, 50
Place it on the edge of your workbench. Used in conjunction with the Lie Nielson Honing gauge, it will make setting the hone angle quick, easy and repeatable when sharpening your plane.
This will relocate the HVAC controls to the bottom, and let you install a double din radio.
Single and custom versions available, contact us for a customization just for your needs.
Radio opening 7in x 4in (176mmx103mm)
Some assembly required.
Printed with tough PETG plastic.
These tools are a gauge to set consistent bevel angles when honing chisels and plane blades. It features a stop block to make the handling easier.
Large easy to read text
Both Chisel and Plane gauges included.
High quality print for accuracy. These are printed with high accuracy and checked for quality control.
Complete set of Porsche 944 defrost vents for the dash.
8 outer, 2 inner.
These are 3D printed with carbon fiber filled ABS plastic . It's super tough, handles high heat of the dash in summer sun, and has an amazing finish.
These will replace your broken, missing vents with a complete new set, 8 outer, 2 inner defrost vents. They snap into place, and I'll suggest a small dab of adhesive to keep them in place for years to come.
3D printed with USA made, ABS filament from Atomic Filament. These rigid, and made from ABS, same as most of the other plastic on the car. It will handle any interior car heat without issue.
These are high quality and fit perfect.
This will let you install a double din head unit in your 3rd gen Camaro.
Includes adjustable side brackets for mounting your radio.
3rd Gen Camaro Double Din Radio Bezel with heat/AC controls below the radio.
Printed with an OEM like texture in Black. (other colors are possible, message me for requests)
Reversed HVAC controls. The vent heat air condition controls are positioned on the bottom. You will need to make new screw holes to mount the HVAC panel in the lower position. I've circled the holes with red in one of the pics.
This raises the double din unit up for better viewing. Also give you a pretty exclusive modification to your car.
Fits 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, and 92 Camaro models.
Replacement map light bezels for your overheat console. Bezel only, no light.
3D printed with carbon fiber filled ABS from atomic filament.
1982-1992 3rd Gen Camaro Snap In Cupholder. Condition is New. Shipped with USPS Priority Mail.
You will need to remove the metal insert inside your ashtray. Then the cupholder will fit tightly into the void and securely hold the cupholder in place.
You can easily remove the cupholder, and store it away when not needed.
The cup is 80mm wide at the top and can hold a Yeti or big gulp.
The box is big enough to hold a smartphone.
It is 3d printed with carbon fiber filled ABS from Atomic filament that is made is the USA. This material ensures strength and rigidity even in the hottest days in the sun.
This is my new cupholder design for 1982-1984 Firebirds. All you need to do is remove the metal insert inside your ashtray, and snap in my cupholder. It is easily removed and can be stored away when not needed. Cupholder sized to fit a 30 tumbler (80mm opening).
3D printed with USA made carbon fiber filled ABS from Atomic Filament . It will endure high temps, and remain rigid while holding a full drink.
78-85 Monte Carlo Malibu El Camino Radio delete bezel.
These are 3D printed with USA Made Atomic PETG filament. They hold up well in high temps and look amazing.
This is an extended handle for any Super ATV flip up windshield. 3D printed on a state of the art Bambu Labs 3D printers, with US made, Atomic brand PETG filament. Printed solid, it will not break or warp. It is incredibly strong, chemical, and UV resistant.
Keep your wires organized and tangle-free with this wire holder from Flow State Manufacturing, LLC. Perfect for soldering projects, this holder keeps your workspace tidy and efficient. The compact design is ideal for any home or workshop, and the high-quality materials ensure long-lasting durability. Whether you're a beginner or a seasoned pro, this wire holder is a must-have for any soldering project.3D printed from high quality PET plastic. Chemical and UV resistant.Black base, and grey upper wire holder. Holds 12 wires, ideal for a car stereo, and custom harness fabrication. Big enough to not be cramped, but small enough to fit in the car dash if needed.Trough design will catch solder droplets.
This is a 12 pack of hook clips compatible with RV Trailer Drawer Cabinet Catch CL-308 and maybe others.
This is the hook clips only, not the entire latch assembly. Most of the time it's just the hook clips that break, and are the only part needed to repair your drawer and cabinet latches without having to buy the entire assembly.
LOOKING FOR SOMETHING CUSTOM?
Need something tailor-made for your project? Our custom manufacturing services are designed to bring your unique ideas to life, ensuring a perfect fit for your specific needs.
Three gauge pod for s550 Mustangs. 3D printed with carbon fiber filled ASA plastic (UV resistant ABS)
features one 52mm pod, 60mm pod, and 52mm pod. (holes are actually 52.5mm/60.5mm)
Ideal for use with the Turbosmart Eboost2 and Eboost3 gauges.
Installation:
carefully pry up and pop off the orginal ac vent trim, then gently pry up and pop off the center dash plate. You will need to unclip and remove the zip tie from the center speaker wiring harness so that the clip will not interfere with the new gauge pod. Reassemble dash components in reverse order after installing gauges.