Three gauge pod for s550 Mustangs. 3D printed with carbon fiber filled ASA plastic (UV resistant ABS)
features one 52mm pod, 60mm pod, and 52mm pod. (holes are actually 52.5mm/60.5mm)
Ideal for use with the Turbosmart Eboost2 and Eboost3 gauges.
Installation:
carefully pry up and pop off the orginal ac vent trim, then gently pry up and pop off the center dash plate. You will need to unclip and remove the zip tie from the center speaker wiring harness so that the clip will not interfere with the new gauge pod. Reassemble dash components in reverse order after installing gauges.
Three gauge pod for s550 Mustangs. 3D printed with carbon fiber filled ASA plastic (UV resistant ABS)
features one 52mm pod, 60mm pod, and 52mm pod. (holes are actually 52.5mm/60.5mm)
Ideal for use with the Turbosmart Eboost2 and Eboost3 gauges.
Installation:
carefully pry up and pop off the orginal ac vent trim, then gently pry up and pop off the center dash plate. You will need to unclip and remove the zip tie from the center speaker wiring harness so that the clip will not interfere with the new gauge pod. Reassemble dash components in reverse order after installing gauges.
