78-85 Monte Carlo Malibu El Camino  Radio delete bezel.

These are 3D printed with USA Made glass filled ABS.   They hold up well in high temps and look amazing.

Drop in rear cupholders for s550 Ford Mustangs. These saddle the hump in the rear floorboard, and secured with included Velcro strips.

Wide, 4in cup with a step down in the bottom for smaller drinks.

Choose between GT, GT/CS, and Pony logos as well as optional color options.

If you need a custom logo or color feel free to send me a message, I usually can accomodate any requests.

1985-1992 Pontiac Firebird Double Din Radio Bezel

3D printed with USA made, ABS filament from Atomic Filament.  These rigid, and made from ABS, same as most of the other plastic on the car. It will handle any interior car heat without issue. 

These are high quality and fit perfect.  

This will let you install a double din head unit in your 3rd gen Camaro.

Includes adjustable side brackets for mounting your radio. 

3rd Gen Camaro Double Din Radio Bezel with  heat/AC controls below the radio.

Printed with an OEM like texture in Black. (other colors are possible, message me for requests) 

Reversed HVAC controls. The vent heat air condition controls are positioned on the bottom. You will need to make new screw holes to mount the HVAC panel in the lower position. I've circled the holes with red in one of the pics.  

 This raises the double din unit up for better viewing. Also give you a pretty exclusive modification to your car.

Fits 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, and 92 Camaro models.

This is my new cupholder design for 1985-1992 Firebirds.    All you need to do is remove the metal insert inside your ashtray, and snap in my cupholder. It is easily removed and can be stored away when not needed. Cupholder sized to fit a 30 tumbler (80mm opening).

3D printed with USA made carbon fiber filled ABS . It will endure high temps, and remain rigid while holding a full drink.

78-88 Cutlass Double Din Radio Bezel. With frosted frame backlit and logo

Features Cutlass Rocket on left side. Radio opening 180mm x 100mm ( 7in x 4in) fits most 7in double din screens great. You will need to reuse your spring clips from your original bezel. I can make them for a singe din, HVAC deleted, as well as other customizations for led backlight, different colors, etc. Message me for a quote. 3D printed with high quality black petg plastic.

This is a plate that will replace your ashtray in 1982 - 1992 Chevrolet Camaro.

Multicolor designs (These are NOT led Backlit)

3D Printed in high quality PETG plastic.

78-85 Monte Carlo Malibu El Camino  HVAC delete bezel.

HVAC Panel opening deleted. Nice clean look. Double and Single din versions.

These are 3D printed with USA Made Atomic PETG filament.  They hold up well in high temps and look amazing.

This will relocate the HVAC controls to the bottom, and let you install a double din radio.

Single and custom versions available, contact us for a customization just for your needs.

Radio opening 7in x 4in (176mmx103mm)

Some assembly required.

Printed with tough PETG plastic.

Complete set of Porsche 944 defrost vents for the dash.

8 outer, 2 inner.

These are 3D printed with carbon fiber filled ABS plastic . It's super tough, handles high heat of the dash in summer sun, and has an amazing finish.

These will replace your broken, missing vents with a complete new set, 8 outer, 2 inner defrost vents. They snap into place, and I'll suggest a small dab of adhesive to keep them in place for years to come.

3D printed with USA made, ABS filament from Atomic Filament.  These rigid, and made from ABS, same as most of the other plastic on the car. It will handle any interior car heat without issue. 

These are high quality and fit perfect.  

This will let you install a double din head unit in your 3rd gen Camaro.

Includes adjustable side brackets for mounting your radio. 

3rd Gen Camaro Double Din Radio Bezel with  heat/AC controls below the radio.

Printed with an OEM like texture in Black. (other colors are possible, message me for requests) 

Reversed HVAC controls. The vent heat air condition controls are positioned on the bottom. You will need to make new screw holes to mount the HVAC panel in the lower position. I've circled the holes with red in one of the pics.  

 This raises the double din unit up for better viewing. Also give you a pretty exclusive modification to your car.

Fits 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, and 92 Camaro models.

Replacement map light bezels for your overheat console. Bezel only, no light.

3D printed with carbon fiber filled ABS from atomic filament.

This is my new cupholder design for 1982-1984 Firebirds.    All you need to do is remove the metal insert inside your ashtray, and snap in my cupholder. It is easily removed and can be stored away when not needed. Cupholder sized to fit a 30 tumbler (80mm opening).

3D printed with USA made carbon fiber filled ABS from Atomic Filament . It will endure high temps, and remain rigid while holding a full drink.

78-85 Monte Carlo Malibu El Camino  Radio delete bezel.

These are 3D printed with USA Made Atomic PETG filament.  They hold up well in high temps and look amazing.

This is a 12 pack of hook clips compatible with RV Trailer Drawer Cabinet Catch CL-308 and maybe others. 

 This is the hook clips only, not the entire latch assembly.   Most of the time it's just the hook clips that break, and are the only part needed to repair your drawer and cabinet latches without having to buy the entire assembly.

3D printed with USA made, high temp, tough PETG plastic filament to ensure Rigidity in high temp environments from Atomic Filament. These are high quality and fit perfect.  3rd Gen Camaro  Radio Delete Bezel with  heat/AC controls moved to the lower position. Printed with an OEM like texture in Black. Reversed HVAC controls. The vent heat air condition controls are positioned on the bottom. You will need to make new screw holes to mount the hvac panel in the lower position. I've circled the holes with red in one of the pics.  Fits 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, and 92 Camaro models.

Fiero Ash Tray Insert Cupholders - black frame/black cups.3D printed with Carbon Fiber filled ABS filament (upgraded material form earlier versions) . Handles interior car heat just fine. Snaps into either side of the Fiero console ash tray. Large double cupholder big enough for large tumblers, big gulp, Mixer bottles, etc.

Black or Grey/Silver frame choice.

1982-84 Pontiac Firebird Double Din Radio Bezel

78-88 Cutlass Double Din Radio Bezel.

Features Cutlass Rocket on left side. Radio opening 180mm x 100mm ( 7in x 4in) fits most 7in double din screens great. You will need to reuse your spring clips from your original bezel. I can make them for a singe din, HVAC deleted, as well as other customizations for led backlight, different colors, etc. Message me for a quote. 3D printed with high quality black petg plastic.

1978-88 Buick Regal Double Din Radio Bezel. Choose which year variant

Will fit popular 7" screen double din radios

Opening 180.5mm x100.5mm (4" x 7")

3D Printed with high quality PCTG plastic. Handles interior car heat great.

3rd Gen Camaro Radio Delete Bezel reversed HVAC controls

This will delete the radio opening, and relocate the hvac control panel to the lower position. Great for a clean look, or a blank slate for your own customizations and mounting.

It snaps in the ashtray, and latches down. Printed from USA made carbon fiber filled ABS from Atomic filament for strength, rigidity, and heat resistance. Big enough to hold a yeti, with an 80mm diameter cupholder. Passenger side versions features a hole in the top allows access to your cig lighter/phone charger.

This is a replacement shift plate for 3rd gen Camaro 1982-1992 custom-made to fit B&M shifters. 3D printed with black PETG from Atomic filament. 

This will replace your ashtray in a 3rd gen Camaro 1982-1992 automatic transmission. It is 3D printed with a tough PETG plastic, with an OEM like surface texture.

Features one cupholder and one switch opening.

You will need to remove your ashtray from your console plate for this mod.

This part will replace your ashtray and manual shift plate on 1982-1992 3rd gen Camaros. The cupholder size is limited due to fitment, but they still hold 12oz cans perfectly. Shift boot bracket included.

Made from Black PETG plastic.

Upgrade your 1982-1992 3rd Gen Camaro with our innovative Cupholders designed to seamlessly replace the traditional ashtray. Crafted using state-of-the-art 3D printing technology, these cupholders are made from tough PETG plastic, ensuring durability for years to come. The surface texture mimics OEM standards, providing an authentic and polished look that seamlessly integrates into your Camaro's interior.

Key Features:

• Perfect Fit: Tailored specifically for 3rd Gen Camaros (1982-1992), our cupholders effortlessly replace the existing ashtray, enhancing both aesthetics and functionality.

• Durable Construction: Constructed with high-quality PETG plastic, these cupholders are designed to withstand the rigors of daily use, ensuring longevity and reliability.

• OEM'ish Surface Texture: Enjoy the look and feel of original equipment with our cupholders' surface texture, which closely matches the OEM standard for a cohesive appearance.

• Easy Installation: Although a modification, installation is straightforward. Simply remove the ashtray from your console plate and replace it with our cupholders for an instant upgrade.

• Shift Boot Compatibility: For automatic transmissions, a minor adjustment may be required. Trim approximately 3/4 inches from the tip of the shift boot slider. Rest assured, this alteration remains hidden under the shift plate/console and has no impact on the boot's functionality.

Upgrade your 3rd Gen Camaro interior with our Cupholders designed to merge practicality with style. Say goodbye to the outdated ashtray and welcome a modern solution that adds convenience without compromising the original charm of your classic ride. Order yours now and elevate your driving experience!